LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 1991 >> Reatta 2D Convertible >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System (PFI) >> Fuel Rail & Injectors >> Installation

Fuel Rail & Injectors: Installation

To install, reverse removal procedure. Coat new "O" rings with oil. Install "O" rings on injectors. Tighten fuel rail retaining bolts to specification. See TORQUE SPECIFICATIONS  table at end of article.



To install reverse removal procedure. Lubricate injector "O" rings with oil. Install injector-to-fuel rail retaining clip, with open end facing injector electrical connection. Tighten fuel rail retaining bolts.



To install, reverse removal procedure. Coat new "O" rings with oil. Install "O" rings on injectors. Tighten bolts to specification. See TORQUE SPECIFICATIONS  table at end of article.



To install, reverse removal procedure. Coat new "O" rings with oil. Install "O" rings on injectors. Tighten bolts to specification. See TORQUE SPECIFICATIONS  table at end of article.

scientia non olet · About LEMON Manuals