BCM Input Parameters:
- BI01 Panel lamp switch display is LO when panel lamp switch is in off position.
- BI02 Park lamp switch display is LO when parklamp switch is in off position.
- BI03 Driver door ajar switch display is LO when drivers front door is ajar.
- BI04 Passenger door ajar switch display is LO when passengers door is open.
- BI05 Door jamb switch display is LO when any door is open.
- BI06 Door handle switch display is momentarily LO when either outside door handle button is depressed.
- BI08 Low refrigerant pressure switch display is LO when system is low on refrigerant.
- BI09 Washer fluid level switch display is LO when vehicle is low on washer fluid.
- BI16 Key in ignition display is LO "only" when key is in LOCK position. (With ignition ON, display will always read HI.)
- BI18 Brake pressure signal is LO when brake controller detects pressure problem.
- BI21 Low brake fluid display is LO when brake fluid is low.
- BI22 Park brake switch display is LO when parking brake is applied.
- BI24 Fog lamp switch display is LO whenever switch is pressed.
- BI25 Seat belt switch display is HI when drivers seatbelt is fastened.
- BI51 Generator feedback display is LO when there is generator problem or engine not running.
- BI71 Cruise control brake switch display is HI when cruise ON/OFF switch is ON and brake pedal is not depressed .
- BI75 Cruise control on/off switch display is HI when cruise ON/OFF switch is ON and set/coast switch is depressed.
- BI76 Cruise control set/coast switch display is HI when cruise ON/OFF switch is ON and set/coast switch is pushed.
- BI77 Cruise control resume/accel switch display is HI when cruise ON/OFF switch is ON and resume/accel switch is pushed.
- BI78 Headlamps display is HI whenever headlamp switch is ON.
- BI79 High beam switch display is LO as long as lever is pulled in.
- BI82 Twilight enable switch display is LO whenever twilight sentinel headlamp switch is ON (Riviera Only).
- BI83 Fog lamp switch display is HI whenever fog lamps switch is ON (Reatta Only).
- BI88 Low oil level switch display will be HI when engine oil level is low.