ECM Output Parameters:
- E000 No outputs display will not show HI or LO. This is normal resting code where no outputs will be cycled.
- E001 Torque Converter Clutch display will be LO when TCC solenoid is ON (energized).
- E004 EGR solenoid #1 display will be LO when #1 EGR solenoid is ON (energized).
- E005 EGR solenoid #2 display will be LO when #2 EGR solenoid is ON (energized).
- E006 EGR solenoid #3 display will be LO WHEN #3 EGR solenoid is ON (energized).
- E007 Canister purge solenoid display will be LO when solenoid is ON (energized).
- E008 A/C RELAY display will be LO when A/C clutch relay is ON (energized).
- E009 #1 coolant fan relay (FAN REL 1) display is LO when coolant fan is ON (energized).
- E010 #2 coolant fan relay (FAN REL 2) display is LO when coolant fan is ON (energized).
- E011 IAC MOTOR output display will cycle LO (IAC extending) to HI (IAC retracting). DO NOT ACTIVATE this output if IAC has been removed from throttle body.