BCM Output Parameters:
- BO00 No outputs display will not show HI or LO. This is normal resting code where no outputs will be cycled.
- BO01 Cruise control vent solenoid display is HI when vent solenoid is ON (energized). Cruise ON/OFF switch must be ON for output to cycle.
- BO02 Cruise control vacuum solenoid display is HI when vacuum solenoid is ON (energized). Cruise ON/OFF switch must be ON for output to cycle.
- BO03 Retained accessory power (RAP) relays display is LO when relays are ON (energized).
- BO04 Courtesy lamps relay display is LO when relay is ON (energized).
- BO06 Hi/Lo beam relay display is LO when relay is ON (energized) and hi beams ON.
- BO10 CHIME 1 display is LO when fast chime is ON (sounding).
- BO11 CHIME 2 display is LO when slow chime is ON (sounding).
- BO12 Fog lamp Daytime Running Lights (DRL) display is LO when foglight relay is ON (Reatta Only).
- BO13 Twilight display (Riviera) is LO when relay is ON (energized). (Reatta) Park lamps are on when relay is LO.
- BO14 DRL (Daytime Running Lights) - Display is LO when relays are ON (energized) lights ON (Riviera Only)