Code 39: TCC Circuit (3.3L/3.8L W/440-T4 Trans): Notes
Code 39 will set when no Code 29 is set, brake is not applied, TCC is commanded by ECM, transmission is in high gear, engine speed/vehicle speed ratio does not indicate that TCC has engaged, and all of the mentioned conditions have been met for greater than 15 seconds (3.3L) or 30 seconds (3.8L).
NOTE:
Test numbers refer to test numbers on diagnostic chart.
- Checks fuse, brake switch and battery power circuit to the TCC solenoid.
- Checks availability of battery voltage at circuit No. 420.
- Electrical circuits have checked out okay. If there is a TCC engagement problem still, problem is possibly caused by a transmission internal hydraulic failure.