Wheel Bearings
33 41 WHEEL BEARINGS - TIGHTENING TORQUES SPECIFICATIONS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Drive flange hub to output shaft | I01 | M16 | Replace screw. | |
| Tightening torque | 50 Nm | |||
| Angle of rotation | 155° | |||
| 2AZ Wheel bearing to wheel carrier NB: Pay attention to the allocation of wheel bearing screws. |
I01 | M12x1.5 | Replace screws. | |
| Tightening torque | 80 Nm | |||
| Angle of rotation | 90° | |||
| M12x1.25 | Replace screws. | |||
| Tightening torque | 120 Nm | |||
| Angle of rotation | 90° | |||