Install range extender electrical machine electronics (REME)
- Insert the range extender electrical machine electronics (REME) (3).
- Tighten the screws (1) and the nut (2).
- Connect and lock the coolant hoses (3).
WARNING:
DANGER
Potential equalization in high-voltage system .
Mortal hazard if the potential equalization screw connection is not correct!
Potential equalization in high-voltage system .
Mortal hazard if the potential equalization screw connection is not correct!
- Observe the safety requirements for potential equalization screw connection.
- Clean contact faces and have then checked by a second person.
- Tighten the screws/nuts for equipotential bonding with torque; have a second person check the torque.
- Correct execution of this work must be documented by both persons in the vehicle records.
- Position the potential equalization line (2) and tighten the screw (1).
- Connect and lock the high-voltage cable connector (6).
- Attach the high-voltage cable in the clamps (5).
- Connect and lock the signal connector (4).
- Connect the high-voltage connector (3) to the range extender electrical machine electronics (REME).
- Tighten screws (2).
- Connect and lock the high-voltage safety plugs (1).
- Insert the heat shield (2).
- Tighten the screws (1) the heat shield.