LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2021 >> i3 Range Extender >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiper/Washer Systems >> General Electrical System -- Repair (I01) >> 61 35 Control Units, Modules >> Removing and installing/replacing the Car Sharing Module

Removing and installing/replacing the Car Sharing Module

Special tools required: 

NOTE: Use the ignition key for service-relevant driving or activities with a car sharing vehicle.
Do not book drivings!
The Car Sharing Module is located in the center armrest.

CAR SHARING MODULE FUNCTIONAL DESCRIPTION .

Open lid of center armrest (1). Insert special tool 2 354 571  in Car Sharing Module (3) as shown and press down.

Remove Car Sharing Module (3) from base plate (2).

Replacement: 

After installing a new Car Sharing Module, proceed as follows: 

G11148348Courtesy of BMW OF NORTH AMERICA, INC.
  1. Lock vehicle with ignition key.
  2. Wait until the green LED on the external reader lights up.

    (The external reader is located on the windshield in the bottom left corner in the direction of travel.)