Install head unit
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Connect and lock the connector (3) to the head unit (4).
- Position the cable bracket (2) correctly and engage it in the detent (1).NOTE: RISK OF DAMAGE
Damage to the instrument cluster (KOMBI) or the head unit
A ground offset can occur when releasing and connecting the cables. This can generate currents that render the instrument cluster (KOMBI) or the head unit unusable.- When releasing: First release the APIX data cable (blue).
- When connecting: Connect the APIX data cable (blue) last.
- Connect and lock all the connectors in the marked area with the head unit (1) in correct assembly sequence.
All cables must be routed correctly.
- Feed in the head unit (2).
- Tighten down screws (1).
TIGHTENING TORQUE SPECIFICATIONS
| Head unit to function carrier | ||
| Thermoplastic ovalhead screw | Tightening torque | 1.8 Nm |
Follow-up work
- Refer to INSTALLING RADIO OPERATING UNIT AND AIR CONDITIONING CONTROL PANEL .
- Refer to INSTALLING DECORATIVE STRIP ON CENTER OF DASHBOARD .
- Refer to DISCONNECTING THE NEGATIVE BATTERY CABLE OF THE SYSTEM BATTERY .
- Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .
- Refer to ENCODING/PROGRAMING CONTROL UNIT(S) .
- Refer to INSTALLING THE CORRECT NAVIGATION MAP .
- Refer to IMPORTING THE SERVICE HISTORY .
- Refer to INITIALIZING COMPONENT PROTECTION .