Installing front brake disk

NOTE: TECHNICAL INFORMATION
Brake discs must only be replaced in pairs (per axle).
Fit new brake discs only together with new brake pads.

Thoroughly clean the contact surface of the wheel hub and remove traces of corrosion if necessary.
Unevenness in the contact surface can cause distortion in the brake disk (2) !
Position the brake disc (2) .
Replace screws (1) .
Parts: Screws

Tighten the screws (1) .

TIGHTENING TORQUE SPECIFICATIONS

Brake disc to front wheel hub
M8 Replace screw.	Tightening torque	16 Nm

Courtesy of BMW OF NORTH AMERICA, INC.