Install Outer Wheel Arch Section With Reinforcement

NOTE: TECHNICAL INFORMATION
Use only approved spot welder for repair
For additional information see: 41 00... applicable BMW Workshop Equipment

Install the new outer wheel arch section part in areas (1) and (2) and weld it according to the new part preparation process

Courtesy of BMW OF NORTH AMERICA, INC.
Weld new part in the areas (1)
In this process, avoid excessively high heat input in the adjacent adhesive area (arrows)

Courtesy of BMW OF NORTH AMERICA, INC.
Weld the new part in the area (1)
Avoid applying too much heat to the adjacent adhesive area (2)

Courtesy of BMW OF NORTH AMERICA, INC.
Install new part and weld in the areas (1) and (2)

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: TECHNICAL INFORMATION
For additional information see: INSTALLING CAVITY SEALING (NOT EXPANDED) .
Apply sealant D1 to the cavity sealing (1)
Install cavity sealing (1)

Courtesy of BMW OF NORTH AMERICA, INC.

CONSUMABLE SPECIFICATION

Sealant D1 (seam sealing) 310 ml 83422409985
Apply sealant D1 to the cavity sealing (2)
Install new part and weld in the areas (1)

Courtesy of BMW OF NORTH AMERICA, INC.

Courtesy of BMW OF NORTH AMERICA, INC.
Apply sealant D1 to the cavity sealing (1)
Install cavity sealing (1)