Installing the wiper console

• Position the wiper console (2) 
• Connect connectors (1)  and lock

  Courtesy of BMW OF NORTH AMERICA, INC.

• Guide the wiper console (3)  into the guide (4)  and position correctly
• Clip in the cable bracket (2) 
• Replace and tighten the nuts (1) 

  Parts:  Nuts

  TIGHTENING TORQUES SPECIFICATION
  
  

  Wiper console to body
  Nut M8 Replace nut	tightening torque	11.8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Guide in and clip in the water drain channel (1) 

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING TENSION STRUT ON SHOCK TOWER .
• Refer to INSTALLING WINDSHIELD PANEL COVER .
• Refer to INSTALLING LEFT AND RIGHT WIPER ARM .
• Refer to INSTALLING THE REAR RIGHT ENGINE COMPARTMENT COVER .
• Refer to INSTALLING THE COVER OF THE ENGINE COMPARTMENT ON THE REAR LEFT .