Removing and installing/replacing distribution box (front) (2016-2022)

Special tools required:

00 9 325

WARNING: Observe SAFETY INFORMATION for handling vehicle battery.

Necessary preliminary tasks:

CLAMP OFF BATTERY LEAD FROM NEGATIVE CONNECTION POINT .

NOTE: Work shown on the F20 by way of example, deviations in detail are possible in other models.

Turn locks (1) 90° counterclockwise.

Unlock catch (3).

Remove cover (2).

G10096920

Courtesy of BMW OF NORTH AMERICA, INC.

Release latch mechanisms (1) and remove lid (2).

Installation note:

Make sure cover (2) is correctly locked.

G10098319

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Latch mechanisms (1) and gasket (2) on lid (3) must not be damaged or missing.

Make sure gasket (2) is correctly seated in lid (3).

G10098320

Courtesy of BMW OF NORTH AMERICA, INC.

Release power distribution box (1) with special tool 00 9 325 from lower section (2) and pull power distribution box (1) upward.

G10098321

Courtesy of BMW OF NORTH AMERICA, INC.

Release and disconnect all plug connections in area (1).

Remove power distribution box (2).

Installation note:

Make sure all plug connections are correctly locked.

G10098322

Courtesy of BMW OF NORTH AMERICA, INC.