22 11... Repair instructions for broken engine mounting bracket/engine mount screw connection
WARNING:
High-voltage system - danger to life!
The following points must be strictly observed prior to starting work and during work:
The following points must be strictly observed prior to starting work and during work:
- Observe SAFETY INFORMATION for working with electric vehicles.
The following work must be performed when the engine mount screw connection or the engine mounting bracket is broken.
- Replace LEFT AND RIGHT SUPPORT BEARINGS INCL. SCREW CONNECTION
- Replace left and right mounting brackets. See REMOVING/INSTALLING/REPLACING TRANSMISSION BEARING BLOCK
.
Vehicles with range extender: see REMOVING/INSTALLING/REPLACING MOUNTING BRACKET OF ELECTRICAL MACHINE and REMOVING/INSTALLING TRANSMISSION MOUNTING BRACKET OF RANGE EXTENDER .
- Replace left and right output shaft. See REMOVING/INSTALLING/REPLACING LEFT OUTPUT SHAFT and REMOVING/INSTALLING/REPLACING RIGHT OUTPUT SHAFT .
- Replace A/C LINES
- Check the HIGH-VOLTAGE CABLE under the drive shaft sleeve and replace it in the event of damage
- Check the BRACING STRUT for paintwork damage and apply corrosion protection to potentially damaged areas of the paintwork
- Check BATTERY VOLTAGE LINE in the area of the iso-fix strip for damage and replace if necessary.
- Program the vehicle to integration level version I001-15-11-501 (from ISTA/P3.57.0)
- Check fuel lines (1) for damage. Replace damaged fuel lines.