ID reader
The label of the vehicle fleet operation is stuck onto the inside of the windscreen on the driver's side.
The ID reader is stuck into this label.
The Car Sharing Module (CSM) is connected with the ID reader via LIN bus. The ID reader is connected via a 4-pin plug connection.
There are 3 LEDs (red, yellow and green) on the ID reader which indicate the status for car sharing.
A card is required for customer authentication for access to the vehicle and release of the electronic immobilizer via the Car Sharing Module (CSM). This card must be held against the ID reader.
| Item | Explanation |
|---|---|
| 1 | ID reader |
| 2 | 4-pin plug connection |
| 3 | LED red |
| 4 | LED yellow |
| 5 | LED green |