Frame Reference Body Dimension

Dimensions in mm.

Dimension tolerances:

The checkpoints shown serve to check the body and the set of attachments.

The specified dimensions always refer to the centrepoint of the bore hole/screw.

Underbody View 1

Fig 1: Underbody Frame Reference Dimensions And Measurement Points (Underbody View 1)

Courtesy of BMW OF NORTH AMERICA, INC.

Underbody View 2

Fig 2: Underbody Frame Reference Dimensions And Measurement Points (Underbody View 2)

Courtesy of BMW OF NORTH AMERICA, INC.

Top View, Front End

Fig 3: Engine Compartment Frame Reference Dimensions And Measurement Points (Top View, Front End)

Courtesy of BMW OF NORTH AMERICA, INC.

The specified dimensions refer to removed assemblies.

View, B-Pillar

Courtesy of BMW OF NORTH AMERICA, INC.

Applicable to E70 only:

Measurement a=1639 mm between screw-on points of door brakes.

Applies only to E71/E72:

Measurement a=1636 mm between screw-on points of door brakes.

Applies only to F15/F15:

Measurement a=1638 mm between screw-on points of door brakes.