32 00... Moving vehicle into design position
WARNING: This page is about a different car, the 2014 BMW X6 M, 2013 BMW X6 M, 2012 BMW X6 M, 2011 BMW X6 M, and 2010 BMW X6 M. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Move VEHICLE INTO NORMAL POSITION .
- Version with air spring system:
- Remove ignition key
- If necessary, pull fuse for air supply system control unit.
- Add/distribute weights in area of spring struts until the vehicle ride height is within the tolerance.
Measure VEHICLE RIDE HEIGHT .