Remove and install Active Sound Design control unit (2016-2022): Notes
NOTE:
RISK OF DAMAGE
Electrostatic discharge.
Damage to or destruction of electrical components.
Electrostatic discharge.
Damage to or destruction of electrical components.
- Leave electrical components in original packaging until just before they are installed. Use the original packaging only for any return shipments. Always package removed components straight away.
- Read and comply with user information on using the associated special tool 12 7 060.
- Only tap the housings of electrical components. Do not tap pins or multi-pin connectors directly.
- Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
- For additional information:
See notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION) .
NOTE:
RISK OF DAMAGE
Sensitive optical fibers.
Damaged optical fibers can result in loss of function of the LED.
Sensitive optical fibers.
Damaged optical fibers can result in loss of function of the LED.
- Do not bend optical fibers too much and do not kink, as well. The minimum permitted bending radius is 25 mm.
- Do not subject optical fibers to tensile loads or heat influence.