Intake System: Notes
TIGHTENING TORQUES SPECIFICATIONS
| Holder for intake system to cylinder head/crankcase | ||
| M6 | Tightening torque | 10 Nm |
| Holder for wiring harness to intake system | ||
| screw | Tightening torque | 5 Nm |
| Intake plenum holder on engine | ||
| BM6x 16 | Tightening torque | 10 Nm |
| Intake plenum to cylinder head | ||
| M6 | Tightening torque | 10 Nm |
| Intake system to holder front/rear | ||
| Tightening torque | 8 Nm | |
| Tank vent line to intake system | ||
| Tightening torque | 5 Nm | |