11 11 Engine Block
4 CYL. B46/B48 ENGINE:
11 11 ENGINE BLOCK - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Bearing cap to crankcase (collar screw 11.9) | B42S20O0/B46M0/O0/B48M0/O0 | M10x1.5 | Replace screws and screw in hand-tight. 1. Joining torque 2. Angle of rotation 3. Angle of rotation |
25 Nm 60° 60° |
| 2AZ Oil spray nozzle in crankcase | B42S20O0/B46M0/O0/B48M0/O0 | M6 | 8 Nm | |
| 3AZ Bearing journal of tensioning and guide rail | B42S20O0/B46M0/O0/B48M0/O0 | M8 | Replace bolt. | 20 Nm |
| 4AZ Camshaft wheel with ball bearing to crankcase | B42S20O0/B46M0/O0/B48M0/O0 | M12x1.5 | 108 Nm | |
| 5AZ Special tool/holder to crankcase | B42S20O0/B46M0/O0/B48M0/O0 | M 10x35 | 40 Nm | |
| 6AZ Special tool 11 8 930 to special tool 00 2 300 | B42S20O0/B46M0/O0/B48M0/O0 | M 14x35 | 160 Nm | |
| 7AZ Chain tensioner to crankcase | B42S20O0/B46M0/O0/B48M0/O0 | M6x22 | 10 Nm | |
| 8AZ Spacing screw for acoustic cover on engine block (Key range 17) | B42S20O0/B46M0/O0/B48M0/O0 | M8x12 | 12 Nm | |
4 CYL. N47 (DIESEL) ENGINE:
1111 TIGHTENING TORQUE SPECIFICATION - ENGINE BLOCK
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Main bearing bolts (steel bolts 12.9 PHR/phosphate treated) | N47D20 O1 | M10x85 12.9 | Replace screws. | |
| 1. Jointing torque | 25 Nm | ||||
| 2. Jointing torque | 50 Nm | ||||
| 3. Angle of rotation | 60 ° | ||||
| 4. Angle of rotation | 60 ° | ||||
| 2AZ | Coolant drain plug to crankcase (if installed) | N47D20 O1 | M14x1.5 | Replace the sealing ring. | 25 Nm |
| 3AZ | Clamping rail/guide rail | N47D20 O1 | M8 | Bearing journal | 20 Nm |
| 4AZ | Chain tensioner, bottom | N47D20 O1 | M6 | 10 Nm | |
| 5AZ | Oil spray nozzle for chain drive | N47D20 O1 | M6 | 10 Nm | |
6 CYL. B58 ENGINE:
1111 ENGINE BLOCK - TIGHTENING TORQUES SPECIFICATION
| Main bearing cap to crankcase | ||
| M10x85 Replace screws. |
1. Joining torque | 25 Nm |
| 3. Angle of rotation | 60° | |
| 4. Angle of rotation | 60° | |