Installing air conditioning compressor
WARNING: This page is about a different variant/trim than selected.
- Feed the air conditioning compressor in and protect it from falling.
- Replace the sealing rings with the special tool 0 496 714 (00 9 030)
.
Parts: Sealing ring
- Replace the guide sleeves using special tool 2 298 505
.
Parts: Guide sleeves
- Attach the refrigerant lines to the air conditioning compressor (3).
- Tighten down screws (2).
- Connect connectors (1) and lock.
- Position the air conditioning compressor (2) on the component carrier.
- Tighten the screws (1).