61 31 008 Removing and installing (replacing) steering column switch cluster

IMPORTANT: Move wheels into straight-ahead position and do not alter this position during the repair work.
Do not under any circumstances turn the steering column switch cluster when the steering wheel is removed.

Necessary preliminary work:

Remove STEERING WHEEL

Unclip steering column shroud upper section and lower section (1).

Unfasten screws (2).

Tightening torque: 61 31 3AZ .

Remove steering column switch cluster (3) in direction of arrow.

Installation note:

During installation, take care to position the anti-twist lock correctly on the coil spring cassette!

Fig 1: Removing Steering Column Switch Cluster

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Remove steering column switch cluster (2).

Fig 2: Identifying Steering Column Switch Cluster With Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.