EME Faults Cannot Be Read In ISTA (SI B12 01 18)

Publication date: 2018-01-01
Reference number: SI B12 01 18

EME FAULTS CANNOT BE READ IN ISTA

TECHNICAL SERVICE BULLETIN

Reference Number(s): SI B12 01 18, Date of Issue: January 01, 2018

BMW:	I01 (i3 and i3 REX)
GROUP:	Engine Electrical Systems

SITUATION

While diagnosing faults with in the EME, no fault details will appear and no relevant test plans will be linked.

CAUSE

Software error in ISTA Versions 4.09.1x and 4.09.2x

CORRECTION

Until the release of ISTA 4.09.3x vehicles with driveability concerns or emissions warning lights (MIL Activated) will require diagnosis via PuMA or TC.

PROCEDURE

EME Faults and vehicle cases will be broken up into two categories:

For EME Faults with no customer driveability complaints or warning lights illuminated → Clear faults and release the vehicle.
For EME Faults with a warning light illuminated, CCM active, or with any driveability complaints Create a TC eMobility case for further evaluation.

WARRANTY INFORMATION

This bulletin is meant to be a diagnostic hint and carries no further warranty information.