32 00... Moving vehicle into normal position

Necessary preliminary work: 

• Check compliance with TEST CONDITIONS , repair vehicle if necessary.

• Check the vehicle interior and luggage compartment (incl. luggage compartment well) for load and unload the vehicle, if required.
• Place the DIN load in the vehicle.

  Vehicle fully assembled for normal operation with: 2 x 68 kg on front seats (seats in center position); 1 x 68 kg on rear seat (center); 1 x 21 kg in luggage compartment (center) and full fuel tank.

• Determine the VEHICLE RIDE HEIGHT .
  NOTE: If the vehicle ride height is not inside the tolerance (refer to TECHNICAL DATA ), the vehicle must be repaired (coil spring/leakage).