65 82 300 Removing and installing (replacing) Touchbox controller control unit
IMPORTANT:
Read and comply with NOTES
on protection against electrostatic damage (ESD protection).
Necessary preliminary tasks:
- Remove the LOWER LEFT C-PILLAR TRIM PANEL
REMOVAL:
Release screws (1).
Disconnect connector (2).
Remove control unit (3).
INSTALLATION:
Position control unit (3).
Tighten down screws (1).
Connect connector (2).
Required reworking:
- Install the LOWER LEFT C-PILLAR TRIM PANEL
Replacement:
Carry out VEHICLE PROGRAMMING AND ENCODING .