Teach in new key
| Index | Description |
|---|---|
| 1 | Breakpoint of the key |
For teaching-in the key hold the key at the steering column as per the graphic!
The following options exist for teaching-in a new key:
- Perform service module.
- Manual teach-in
The following activities must be performed in this connection:
- Remove all existing keys from the passenger compartment.
- Press the START-STOP button. The Check Control message "No remote key found" appears and then the request to hold the key at the ring aerial.
- Hold the new remote key going around at the ring aerial and then press the START-STOP button again. If nec. press the START-STOP button several times until the ignition can be switched on.
- Then perform a function check. i.e. lock/unlock the central locking system and them perform an engine start.
NOTE:
If the remote key is a replacement for a lost, stolen or defective remote key, the old remote key still has to be blocked using the service function "Block/Release remote key". To use the Car/Key functions, the service function "Remote key, change personalization number" has to be run.