Structure and inner electrical connection

The Night Vision camera is activated, e.g. for diagnosis, via the Local CAN. The night vision electronics convert the symmetric video signals received from the Night Vision camera into a CVBS signal.

The night vision electronics are connected to the Night Vision camera via an LVDS data line and shielding.

Fig 1: Night Vision Electronics - Circuit Diagram

Courtesy of BMW OF NORTH AMERICA, INC.

Pin assignments 

The graphic above shows only the supply and bus connection. The current pin assignment can be found on the BMW ISTA diagnosis system among the wiring diagrams. Click on the component code in the wiring diagram to activate the "Installation location" and "Pin assignment" tabs.