LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2016 >> 335i Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1280 (Technical Data (F31 & F34)) >> 11 00 Engine

11 00 Engine

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

B46/B48 4-CYL. ENGINE: 

1100 TECHNICAL DATA OVERVIEW

Engine oil
Filling capacity, motor oil change with oil filter element 5.25 l
Engine oil B46B20O0/B48B16M0/B48B20M0/B48B20O0
Filling capacity, motor oil change with oil filter element 5.25 l
1100 TECHNICAL DATA OVERVIEW

Cylinder bore
Diameter of cylinder bore 82.007 mm... 82.014 mm
Permitted irregularity of the cylinder bore 0.01 mm
Permitted conicity of the cylinder bore 0.01 mm
Permissible total wear tolerance between piston and cylinder bore (engine operated) 0.15 mm

N47 4-CYL. ENGINE (DIESEL): 

11 00 ENGINE IN GENERAL N47T D20 TOP POWER STAGE 1 - TECHNICAL DATA SPECIFICATION

Cylinder   4
Bore hole mm 84
Stroke mm 90
Effective displacement cm3 1995
Compression ratio :1 16.5
Cutoff speed 1/min 5000
Permissible constant speed 1/min 4400
Compression pressure (of all cylinders roughly same value) bar >16..

B58 6-CYL. ENGINE: 

ENGINE - TECHNICAL DATA SPECIFICATIONS

Compression pressure
Compression pressure of all cylinders is approximately the same. >12 bar
Engine oil
Filling capacity, motor oil change with oil filter element 6.20 l
Engine oil
Filling capacity, motor oil change with oil filter element 6.50 l