61 00... Notes on handling optical fibers
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2018 BMW 340i xDrive, 2018 BMW 340i, 2018 BMW 330i xDrive, 2018 BMW 330i, and 2017 BMW 340i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
To avoid damage when handling optical fibers, comply with the following points:
- The minimum permitted bending radius is 25 mm
- Do not subject optical fibers to compressive and tensile load
- Protect optical fibers against the effects of heat ≥85°C (e.g. during welding work, drying work with infrared beams or hot air blower)
- Fiber-optic cables are permitted to show only one junction point (bridge), replace fiber-optic cables if necessary
NOTE:
The optical fibers are colored differently as follows:
- Green = MOST (Media Oriented System Transport ) optical fiber
- Yellow = ISIS (Integrated Service and Information Server ) optical fiber
- Orange=repair optical fibers
Follow notes for PROCESSING CABLES AND OPTICAL FIBERS.