Section 1164 (Fuel System - Repair (F30, 6-CYL AWD))
WARNING: This page is about a different car, the 2018 BMW 340i xDrive, 2017 BMW 340i xDrive, and 2016 BMW 340i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
- 13 31 Fuel Delivery Line And Fuel Pressure Test
- 13 51 Injection Pump
- 13 53 Injector Nozzles And Lines
- 13 53... Clean the cylinder head in the area of the injectors with sandy/dusty contamination
- 13 53 080 Remove and install/replace rail at cylinder 1-3
- 13 53 081 Remove and install/replace rail at cylinder 4-6
- 13 53 082 Remove, install/replace both rails
- 13 53 180 Replace pressure line (between high pressure pumps and pressure accumulator)
- 13 53 301 Removing and installing/replacing injector(s) of the injection system at cylinders 1-3
- Notes
- REP-TAT-P-1353-01 Remove the injectors for cylinders 1 to 3
- REP-TAT-P-1353-26 Prepare the injectors for installation
- REP-TAT-P-1353-02-G11 Installing the injectors for the cylinders 1 to 3
- REP-TAT-P-1353-25 Reset ultra-small quantity adaptation
- 61 35... Notes on ESD protection (Electro Static Discharge)
- 13 53 302 Removing and installing/replacing the injector(s) of the injection system cyl.4-6
- 13 53 318 Remove and install all injectors in the injection system
- Notes
- REP-TAT-P-1353-01 Remove the injectors for cylinders 1 to 3
- REP-TAT-P-1353-01 Remove the injectors for cylinders 4 to 6
- REP-TAT-P-1353-26 Prepare the injectors for installation
- REP-TAT-P-1353-02 Installing the injectors for the cylinders 1 to 3
- REP-TAT-P-1353-02 Installing the injectors for the cylinders 4 to 6
- REP-TAT-P-1353-25 Reset ultra-small quantity adaptation
- 13 53 596 Replacing the high-pressure fuel sensor (after vehicle diagnosis)
- 13 54 Throttle Body
- 13 62 Sensor For Control Unit
- 13 62 532 Replace coolant temperature sensor (after vehicle diagnosis) (on the crankcase)
- 13 62 538 Replace charge air temperature sensor (after vehicle diagnosis)
- 13 62 560 Remove and install/replace hot film air mass meter (after vehicle diagnosis)
- 13 62 590 Replacing the boost pressure sensor (on charge air line)
- 13 62 592 Replacing boost pressure sensor (after vehicle diagnosis) (in the intake plenum)
- 13 62673 Replace temperature sensor of cylinder head
- 13 71 Intake Air Filter, Housing, And Air Duct
- 13 71... Removing bottom sound insulation (N47 D16/20 K/U/O/T 1)
- 13 71 000 Remove and install intake silencer housing
- 13 71 001 Replacing air filter element
- 13 71 044 Removing and installing/replacing charge air line
- 1371 165 Removing and installing/replacing the air duct (clean air pipe upstream of exhaust turbocharger)
- 13 72 Air Cleaner (Air Filter Insert)
- 13 90 Carbon Canister Ventilation