Initializing Power Window Regulators
Sporadic faults or switch-off can be rectified by deletion of an initialization and subsequent re-initialization.
Prerequisites:
- Vehicle stationary
- Sufficient battery voltage
- Terminal "R" or terminal "15" switched on
- All doors closed
Attention! The anti-trapping mechanism is not active during initialization. Make sure that there are no persons or foreign materials in the area of the side windows during the initialization.
- Fully close the side window by pulling the switch. Possibly the switch must be operated several times until the side window is fully closed.
- Then pull the switch again via the toll function and hold for one second.
- The power window is initialized.
Subject to technical changes