13 62 582 Removing and installing/replacing oil temperature sensor (N55)

WARNING: Scalding hazard!
Only perform this work on an engine that has cooled down.

Necessary preliminary work:

Recycling:

Catch and dispose of emerging engine oil.

Observe country-specific waste disposal regulations.

Unlock plug (1) and remove.

Release oil temperature sensor (2).

Tightening torque 13 62 7AZ .

Fig 1: Identifying Oil Temperature Sensor Connector

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Add final details to vehicle

Check engine oil level. Top up engine oil if necessary.