13 62 535 Replacing charging pressure sensor (N57 D30 O/T 1)
Necessary preliminary tasks:
- Read out the fault memory of the DDE control unit.
- Switch off ignition.
- Remove INTAKE SILENCER HOUSING .
- Remove sound insulation on injectors.
Unlock connector (1) and remove.
Release screw (2).
Tightening torque 13 62 5AZ .
Remove charge-air pressure sensor (3).
Installation note:
Check sealing ring of charge-air pressure sensor and replace if damaged.
Prior to installation, apply a thin coat of anti-friction agent to sealing ring of charge-air pressure sensor.
NOTE:
Check stored fault message.
Delete fault memory.