LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2015 >> 528i >> Repair and Diagnosis (Single Page) >> General Information >> OEM General Information >> Functional Description - F10 - HVAC System, Steering System, Restraints System >> Restraints System - Functional Description >> Crash safety >> Diagnosis instructions

Diagnosis instructions

NOTE: Replace the Crash Safety Module after 3 crash signals followed by deployment of the safety system

When the safety system is triggered, the crash safety module stores data in a non-erasable memory. The data is relevant to accident research (no access for service). After 3 crash signals, the data memory is full. The airbag warning lamp lights up. The Crash Safety Module must be replaced.

Notes on encoding/programming 

NOTE: Deactivating the acoustic seat belt warning

The acoustic seat-belt warning can be deactivated by encoding. This does not affect a legally prescribed seat belt warning.

NOTE: Code crash safety module

Following replacement the Crash Safety Module must be encoded.

scientia non olet · About LEMON Manuals