11 11 Engine block
TIGHTENING TORQUE SPECIFICATIONS - ENGINE BLOCK
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Main bearing bolts (steel bolts 12.9 PHR) | N57 D30 U/O 1 | M10x85 12.9 | Replace bolts | |
| 1. Jointing torque | 25 Nm | ||||
| 2. Jointing torque | 50 Nm | ||||
| 3. Angle of rotation | 60 ° | ||||
| 4. Angle of rotation | 60 ° | ||||
| 2AZ | Coolant drain plug on engine block. | N57 D30 U/O 1 | M14x1.5 | Replace sealing ring | 25 Nm |
| 3AZ | Tensioning rail/guide rail | N57 D30 U/O 1 | M10 | Bearing journal | 20 Nm |
| 4AZ | Chain tensioner, bottom | N57 D30 U/O 1 | M6 | 10 Nm | |
| 5AZ | Oil spray nozzle for chain drive | N57 D30 U/O 1 | M6x22 | 8 Nm | |
| 6AZ | Coolant connection to crankcase (feed) | N57 D30 U/O 1 | M6x25 | 8 Nm | |
| 7AZ | Coolant connection to crankcase (heating return) | N57 D30 U/O 1 | M6x25 | 8 Nm | |
| 8AZ | Support arms to special tool | N57 D30 U/O 1 | M12x30 | 50 Nm | |
| 9AZ | Special tool 00 2 320 to special tool 00 2 300 | N57 D30 U/O 1 | M14x90 | 90 Nm | |
| 10AZ | Special tool 11 to engine block | N57 D30 U/O 1 | M10x | 35 Nm | |
| 11AZ | Component carrier to engine block | N57 D30 U/O 1 | M8x50 | 18 Nm | |
| 12AZ | Coolant pipe to engine block | N57 D30 U/O 1 | M6x25 | 8 Nm | |