61 13... Removing and installing/replacing fibre-optic cable connector

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 335xi, 2013 BMW 335is, 2013 BMW 335i, 2012 BMW 335xi, and 2012 BMW 335is. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Comply with notes and instructions on HANDLING OPTICAL WAVEGUIDES .

Necessary preliminary tasks

Remove SIDE SECTION ON REAR SEAT BACKREST on left.

Unlock catch (1) and remove deflection roller (2).

Remove fibre optic cable (3) from deflection roller (2).

Unlock catch on fibre-optic cable connector (5) with a suitable tool (4).

Remove fibre-optic cable connector (5) in direction of arrow from deflection roller (2).

Fig 1: Removing Fibre-Optic Cable Connector

Courtesy of BMW OF NORTH AMERICA, INC.

Carefully raise cover cap (1) with a suitable tool and remove from fibre-optic cable connector (2).

Fig 2: Removing Cover Cap From Fiber-Optic Cable Connector

Courtesy of BMW OF NORTH AMERICA, INC.

Carefully raise lock (1) and pull fibre optic cable (2) out of fibre optic cable plug (3).

Installation:

Make sure fibre-optic cable (2) is correctly seated and engaged in fibre-optic cable connector (3).

Fig 3: Identifying Fiber-Optic Cable Connector, Plug And Lock

Courtesy of BMW OF NORTH AMERICA, INC.