LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> X6 M >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Memory Modules >> General Electrical System - Repair >> Control Units, Modules >> 61 35 015 Removing and installing (replacing) control unit for Car Access System

61 35 015 Removing and installing (replacing) control unit for Car Access System

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD PROTECTION) .
NOTE: The comfort access system is a radio-based system and can be interfered with by radio waves from other systems (e.g. mobile phone).

Necessary preliminary work:

Disconnect plug connection (1).

Unlock latch mechanism (2) and pull out control unit for Car Access System (3) in downward direction.

Fig 1: Identifying Latch Mechanism, Car Access System And Plug Connection
G08560869Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out VEHICLE PROGRAMMING/ENCODING .

Vehicles with auxiliary heater: 

Initialize TELESTART HAND-HELD TRANSMITTER .

For vehicles with Rear-seat entertainment (RSE): 

Teach in RSE master key via path: