61 31 214 Removing and installing/replacing switch for Electronic Damper Control (Sport switch)

Necessary preliminary tasks

Release screws (1).

Raise trim (2) slightly.

Fig 1: Identifying Trim And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Plug connection (1) must not be disconnected.

Unlock switch for Electronic Damper Control (2) and remove downwards from trim.

Installation:

Make sure switch for Electronic Damper Control (2) engages correctly on trim.

Fig 2: Unlocking Switch For Electronic Damper Control

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Feed wiring harness (2) in direction of arrow out of gear selector switch carrier (3) and remove switch for Electronic Damper Control.

Fig 3: Feeding Wiring Harness Out Of Gear Selector Switch Carrier

Courtesy of BMW OF NORTH AMERICA, INC.