22 11 Engine mounting
TIGHTENING TORQUE SPECIFICATIONS - ENGINE MOUNTING
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Engine mount to front axle support | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F10 HY / F11 / F12 / F13 / F18 / F20 / F21 / F25 N57 / F30 / F30 HY / F31 / F35 | M8 8.8 | 19 Nm | |
| F25 | M8X45 | 28 Nm | ||
| F25 | M10X30 | 38 Nm | ||
| 2AZ Engine mount to engine support arm | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F10 HY / F11 / F12 / F13 / F18 | M12 10.9 | 100 Nm | |
| F25, F30 - N57 (right engine mount) | M12 10.9 | 100 Nm | ||
| F20 / F21 / F25 / F30 (without N57) | M10 | 56 Nm | ||
| F25, F30 - N57 (left engine mount) | M10 | 56 Nm | ||
| F25 | M12 | 66 Nm | ||
| F30, F31 N47T / F30 HY | M10 | 55 Nm | ||
| F35 | M10 | 55 Nm | ||
| 3AZ Engine support arm to engine | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F10 HY / F11 / F12 / F13 / F18 / F20 / F21 / F25 / F30 / F31 / F35 | M10 8.8 | 38 Nm | |
| F01 N54 / F02 N54 / F07 N55 / F10 N55 / F11 N55 / F20 N55 / F21 N55 / F25 N55 / F30 N55 / F30 HY | M12 8.8 | 66 Nm | ||
| F01 / F02 / F10, F11 N52T, F10, F11, N53 / F25 N52T | M12x46 | Replace screws; jointing torque and angle of rotation must be observed without fail. | ||
| 1. Jointing torque | 34 Nm | |||
| 2. Angle of rotation | 90 ° | |||
| F20 N13 | M10x70, M10x35 | 56 Nm | ||
| 4AZ Additional mass to engine support arm, left | F01 / F02 / F06 / F07 / F10 / F10 HY / F11 / F18 / F25 | M8 8.8 | 19 Nm | |
| 5AZ Engine support arm to front axle differential (reinforcing plate) | F01, F02, F07 / F25, (Allradfahrzeug) | M8 | 19 Nm | |
| 6AZ Tank ventilation line to engine support arm | F30 | M6 | 13 Nm | |
| 7AZ Holder, electric vacuum pump to engine support arm | F30Hyb. | 9 Nm |