63 11... Installing headlight repair kit

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary work:

NOTE:

Damaged retaining tabs (1, 2, 3) can be replaced with the repair kit.

Replacement of headlight is not required!

If necessary, use screws from BMW Parts Department 7 225 228 repair kit.

Fig 1: Identifying Headlight Holder, Screws, And Retaining Tabs

Courtesy of BMW OF NORTH AMERICA, INC.

Retaining tab 2 of first image:

Remove damaged retaining tab (1) as shown.

Fit holder (3) and secure with screws (4).

Slide clamp (2) onto holder (3).

Retaining tab 3 of first image:

Remove damaged retaining tab (5) as shown.

Fit holder (7) and secure with screws (8).

Slide clamp (6) onto holder (7).

NOTE: If necessary, drill out screw holes in holder.

After installation:

Fig 2: Removing Damaged Retaining Tabs And Installing Holder With Clamp

Courtesy of BMW OF NORTH AMERICA, INC.