61 35 132 Removing and installing/replacing central gateway module

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION) .

Necessary preliminary work:

Disconnect plug connection (1).

NOTE: Cable shoe (4) is currently no longer installed.

If installed, release screw (2) and remove cable shoe (4).

Tightening torque 61 35 3AZ .

Pull central gateway module (3) off equipment holder (5) in direction of arrow.

Fig 1: Removing Central Gateway Module

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Make sure central gateway module (3) is correctly installed in equipment holder (5).

Replacement:

Perform FlexRay synchronization via path: