61 35 115 Removing and installing/replacing footwell module

Necessary preliminary tasks 

• Disconnect BATTERY NEGATIVE CABLE .
• Detach both battery cables for negative terminal in F03.
• Remove FOOTWELL SIDE TRIM PANEL ON A-PILLAR, LEFT .

Disconnect connector connections (1) and (3).

Release nuts (2) and remove footwell module (4).

Tightening torque 61 35 4AZ .

Fig 1: Identifying Footwell Module, Connector Connections And Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Carry out VEHICLE PROGRAMMING/CODING .