61 35 107 Removing and installing or replacing junction box electronics
IMPORTANT:
Read and comply with notes on protection against electrostatic discharge (ESD PROTECTION) .
Necessary preliminary work
- Partially remove POWER DISTRIBUTION BOX FOR PASSENGER COMPARTMENT .
Release screws (1) on junction box electronics (2).
Tightening torque 61 14 2AZ .
Disconnect plug connection (1).
Pull junction box electronics (2) out of bracket.
Installation note:
Make sure junction box electronics and plug connections (1) are correctly seated.
Replacement:
Carry out VEHICLE PROGRAMMING/CODING .
Delete transport mode.