61 31... Remount operating unit for additional seat function (clipped version)

Necessary preliminary tasks:

Removal:

Release all latch mechanisms on the operating unit (1) using screwdriver (3-mm blade).

Fig 1: Releasing Latch Mechanisms On Operating Unit Using Screwdriver

Courtesy of BMW OF NORTH AMERICA, INC.

Feed out the operating unit (1) from the rear panel (2).

Fig 2: Identifying Operating Unit And Rear Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect the connector from the printed circuit board (2) and remove the operating unit (1).

Fig 3: Identifying Operating Unit, Connector, And Printed Circuit Board

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip the button (1) using screwdriver (2) and pull out forwards.

Fig 4: Removing Button Using Screwdriver

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Fit the memory button to the operating unit and press to lock into place.

Fig 5: Identifying Operating Unit Memory Button

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Ensure keypads (1) are seated correctly.

Fig 6: Identifying Operating Unit Keypads

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect the connector from the printed circuit board (2) and remove the operating unit (1).

Fig 7: Identifying Operating Unit, Connector, And Printed Circuit Board

Courtesy of BMW OF NORTH AMERICA, INC.

Fit the operating unit (1) to the rear panel (2) and press to lock into place.

IMPORTANT: Pay attention to the freedom of movement and function of the remounted button.

Fig 8: Fitting Operating Unit To Rear Panel

Courtesy of BMW OF NORTH AMERICA, INC.