61 31 544 Replacing roof switch cluster (roof function center): Notes

IMPORTANT: Only new parts may be used for replacement (repair kit).

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

Necessary preliminary work:

Secure switch unit (1) to cover (2).

Fig 1: Identifying Switch Unit On Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Clip light unit (1) into cover (2).

Fig 2: Identifying Light Unit With Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Insert retaining lugs on switching mat (1) correctly into designated guides on board (2).

Connect USIS sensor plug connections (3) to board (2).

NOTE: USIS sensors (3) are used only when anti-theft alarm system is fitted.

Fig 3: Identifying Switching Mat, USIS Sensor Plug Connections And Board

Courtesy of BMW OF NORTH AMERICA, INC.

Insert USIS sensors (1) in direction of arrow into frame (2).

NOTE: USIS sensors (1) are used only when anti-theft alarm system is fitted.

Fig 4: Inserting USIS Sensors Into Frame

Courtesy of BMW OF NORTH AMERICA, INC.

Clip frame (1) into cover (2).

Fig 5: Identifying Frame With Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Turn board (1) over in direction of arrow and connect plug connection (2) to board (1).

Fig 6: Turning Board

Courtesy of BMW OF NORTH AMERICA, INC.