Function logic for retraction of the belt hand-over
The belt hand-over on the driver's side and passenger's side is retracted according to the following function logic:
| Initial state | Action | Function |
|---|---|---|
| Belt hand-over extended, door closed | Close belt lock contact | Belt hand-over retracts |
| Vehicle speed higher than 7 km/h | ||
| Belt hand-over in extended position longer than 60 seconds | ||
| Opening door | ||
| Mechanical blocking | ||
| Belt hand-over extended, door closed, terminal R | Terminal change from R to 30 | Belt hand-over retracts |
The belt hand-over on the passenger's side is also retracted according to the following function logic:
| Initial state | Action | Function |
|---|---|---|
| Belt hand-over extended, door closed, terminal R or 15, seat not occupied | Time equals 10 seconds after terminal R On | Belt hand-over (front passenger) retracts, signal change passenger's door is deleted |