32 00... Test conditions for chassis/wheel alignment check
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Observe the following test conditions prior to the chassis/wheel alignment check:
- Only BMW approved wheel and tire combinations may be installed on the vehicle
- Correct tread depth. The tread depth for each axle may differ from left to right by max. 1-2 mm.
- Correct tire pressure (see label on vehicle).
- All chassis and suspension components must be technically OK.
- Condition of suspension and shock absorbers OK: Visually inspect for breakage, etc.
- Vehicles with self-levelling suspension: Pull fuse of air supply system so that there is no controlling down or up.