When the measured value exceeds the nominal value + 0.2 bar
WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.
- Stop the engine and then monitor the measured value.
- When the measured value drops to the nominal value, the line cross-sections in the fuel return line are constricted or plugged.
- Check the fuel lines for kinks.
If no kinks are visible:
- Replace the return lines.
When the measured value remains too high, the pressure regulator is most likely faulty.