12 90 100 Replacing fan for electronics box

Necessary preliminary tasks:

Switch off ignition.
Follow INSTRUCTIONS FOR DISCONNECTING AND CONNECTING BATTERY .
Disconnect BATTERY ground terminal.
Detach fuse box in passenger compartment and pull back; to do so, refer to Removing fuse box . See 61 13 050 REMOVING AND INSTALLING OR REPLACING FUSE BOX IN PASSENGER COMPARTMENT (BUILT AFTER 03/2007) .

Pull back carpet.

Release lower nut on fuse carrier holder.

Pull holder slightly towards front.

Fig 1: Locating Lower Nut On Fuse Carrier Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connections for fan motor (1).

Release screws (2). Remove fan.

Fig 2: Identifying Fan Motor And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Add final details to vehicle.

Read fault memory.