LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> 135is 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1971 (General Electrical System - Repair) >> Switch >> 61 31 117 Removing and installing/replacing power window switch (driver's side)

61 31 117 Removing and installing/replacing power window switch (driver's side)

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work 

Pull locking pins (1) out of frame (2) for power window switch (3).

Press power window switch (3) upwards in direction of arrow and remove.

Fig 1: Pressing Power Window Switch Upwards
G06895039Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Make sure power window switch (3) is correctly guided (1) and engaged (2).

Fig 2: Identifying Power Window Switch With Guides
G06895040Courtesy of BMW OF NORTH AMERICA, INC.